BMSO 320 / 320 GLH NC

BMSO 320
Fully automatic band saws for cutting solid stocks,tubes and profiles of steel, cast-iron light and nonferrous material.Only 90 deg. cut.Complate steel fabricated.Reductioned gear in oil bath and carbide pads and rollers in the blade guides.The front jaw contains of a number of hardened rollers driven through a worm and wheel by an electric motor.The rear vice consist of a number of free running rollers. A limit switch assembled on top the vice stops the machine when the block is exhausted. Once the work piece clamped between the rollers no further clampings needed. The work is fed through the vice to the bar stop which contains a micro-switch controlling the bar feed motor. A piece counter controls the number of the cuts.The machines stop automatically at the blade breakage. The machines are fitted with a removable coolant tank incorporating a submerged electric coolant pump which supplies coolant to both guide assemblies. Bi-Metal sawblade and 1,2 meter infeed roller table are supplied as standart.

BMSO 320 GLH NC
These are automatic bandsaw for straight and mitre cuts and miter cuts from 30 degrees to 90 degrees. Each machine has two hydraulic vises: one is a fixed vise and is located close the saw blade; the other is mounted on a movable carriage with a range of 500 mm. Material to be cut is by the vise mounted on the carriage. The PLC (Programmable Logic Control) is made by Telemecanique and provides for up to 10 different cutting programs, including cut length and number of pieces to be cut. With this system, the machine can be programmed for the next schedule even while carrying out the current programm. Accrancy of cut length is assured by means of a Newall magnetic measuring scale, which is impervious to dirt, oil,grease , chips and the like. The center of mitre rotation is intersection of the saw blade and the fixed vise jaw; and this insures that there is no change at different angular position.

 

BMSO 320
Standard Features:
• 1,2 mt Roller Table
• Material Limit Shaft
• Saw Blade Brush
• Heavy Duty Gearbox
• Hydraulıc Vıce
• Hydrodynamic Blade Tension
• Security Switch
• Inverter
• Control Panel
• Mechanic Top Clamping
• Coolant Pump
• Height Adjustment Switch
• Saw Blade 27

Ekstra Features:
• ILC Microspray Device
• Hydraulic Blade Tension
• Chip Conveyor
• Sensitive Pressure
• 3 Mt Material Roller Table

 

BMSO 320 GLH NC
Standard Features:
• Saw Blade 34
• Inverter
• Saw Blade Brash
• Securty Swich
• Back Open Vice
• Feeding Vice
• Heavy Duty Gearbox
• PLC Control Panel
• Height Adjustment swich
• Hydromecanic Blade Tension
• SAP Coolant Pump
• Hydraulic Vice To Adjust Degree Panel

Ekstra Features:
• Multiple Segments
• ILC Microspray Device
• Hydraulic Blade Tension
• 3 Mt Roller Table
• Hydraulic Top Clamping