Grid view List view

Showing all 6 results

BMS 280

This bandsaw have been designed to give a low cost compact and rugged machines.Constructed in heavy gauge steel, it offers a strong rigid sawframe, providing a high degree of accurancy when cutting. The machines are fitted with a removable coolant tank incorporating a submerged electric coolant pump which supplies coolant to both guide assemblies. These models can cope with most types of material.Blade guides with rollers and carbide pads provide precise support for the blade. Thermal overload and no-volt release are standart feature and the machines automatically switch off at the end of the cut. Bi-Metal sawblade and matarial support stand are supplied as standart.

 

Standard Features

  • Blade Brash
  • Saw Blade 27
  • SITI Gearbox
  • Control Panel
  • Material Limit
  • Security Switch
  • Inverter
  • Hydromechnic Blade Tension
  • Roller Table
  • Coolant Pump
Beka-mak
Read more

Macc SPECIAL 411 M

SAVEKAPACITET: 90 grader Ø 300 mm/firkant 280 mm / 200×400 mm

Kapacitet ved 45 grader til højre: Ø 240 –   /firaknt 220 mm rektangulær 130 x 2400 mm

Kapacitet ved 60 grader til højre: Ø 140 mm firkant 140 mm rektangulært 140 x 140 mm

Kapacitet ved 45 grader til venstre: Ø 180 mm firkant 160 mm rektangulært  110 x 180 mm

 

BÅNDHASTIGHED: 39-66 m/min – max. Åbning af skruestik 250 mm

BÅNDSAVSKLINGE: 3200 x 27 x 0,9 mm

MOTOR: kw 0,9 x 1,6 kw –

VÆGT: 530 kg

 

24 måneders garanti på fabrikant- og reparationsskader

Read more

Macc SPECIAL 411 CSO

SAVEKAPACITET: 90 grader Ø 300 mm/firkant 280 mm rektangulørt 200×400 mm

Kapacitet ved venstre Ø 180 mm firkanty 160 mm rektangulræt 110 x 180 mm

Kapacitet ved 45 grader til højre Ø 240-   / firkant 220 mm  130 x 240 mm

Kapacitet ved 60 grader til højre Ø 140 ø firkant 140mm – 140 x 140 mm mm

BÅNDHASTIGHED:  3200 x 27 x 0,9  mm

MOTOR: kw 0,0-1,6– vægt 530  kg

Maskinen har automatisk tilspænding, men  efter oversavning skal buen løftes op

 

24 måneders garanti på fabrikant- og reparationsskader

Read more

Macc SPECIAL 391 SVG

  • Vertical rotation on bolt with adjustable tapered bearings without
  • High-capacity band control by two-speed motor and reducer with gears in oilbath
  • Appropriately dimensioned flywheels
  • Strong band guides with tight stress-raiser bearings and adjustable carbide tips
  • Blade tensioning obtained through manual rotation of the handwheel and guaranteed by electromechanical switch
  • Accident-preventing devices on the flywheel casing, on the control handle, and on the blade
  • Cutting thickness 1,2 mm
  • Cutting range right 45°
  • Blade cleaning device with brush
  • Adjustable stop for cuts of the same size
  • Pedestal with rear tray for chip collection
  • Overall dimensions 1800 mm x 1600 mm x 1950 mm
  • Operation
    Cycle start is obtained by pressing the relevant start button. The machine performs the following operations during the cutting cycle:

    1. vice closing and activation of band motor
    2. cutting bow downstroke
    3. band motor stop and return of bow to initial position
    4. vice opening
  • 0,09 kW power – driven pump for band cooling
  • Speed variator for 20 – 90 m/1’ with 2,2 kW motor one speed

24 måneders garanti på fabrikant- og reparationsskader

Read more

Macc SPECIAL 411 M/S

MACC SPECIAL 411  M/S – 60 gr

 

SAVEKAPACITET: Ø 300 mm firkant 280 mm rektangulært mm 200 x 400 mm

Savekapacitet ved 45 grader venstre: Ø 180 mm firkant 160 mm rektangulært 110 x 180 mm

Savekapacitet ved 45 grader højre: Ø 240 mm firkant 220 mm rektangulært 130 x 240 mm

Savekapacitet ved 60 grader højre: Ø 140 mm  firkant 140 mm rektangulært  140 x 140 mm

 

BÅNDDIMENSIONER: 3200 x 27 x 0,9 mm

BÅNDHASTIGHED:  38 – 77m/min

MOTOR: 0,9 – 1,1 kwa

Saven har trinløs variabel tilspænding – 2 hastigheder – båndsprængningskontrol – kølevandsanlæg.

VÆGT: 575 kg

 

FUNKTION: placer saveemnet i skruestikken, tryk på start, herefter spændes skruestikken hydraulisk, herefter

Starter klingen med at rotere og saven kører med tilspænding og saver emnet over. Efter at emnet er oversavet

Løftes savbuen op til øverste position, skruestikken åbnes og emnet kan udtages. Herefter er saven klar til næste oversavning.

 

24 måneders garanti på fabrikant- og reparationsskader

Read more

Macc SPECIAL 411 A

  • Automatic CNC hydraulic shear performing cuts from 45° to the left to 60° to the right and produced according to the current safety standards
  • The equipment is supplied with 39 programs, each of them with 50 steps for a total of 1950 cutting positions with relevant piece-counter
  • Operation:
    1. Material feeding
    2. Fixed vice lock
    3. Rotation of the blade and delivery of the coolant, bow downfeed untill the finishing of the cut, feeding carriage return to the fixed measure
    4. Bow return, blade revolution and coolant delivery stopping
    5. Vice opening
    6. Cycle repetition
  • Step by step hydraulic feeding without length limit
  • Vertical rotation on bolt with adjustable tapered bearings without backlash
  • Appropriately dimensioned flywheels
  • Vice with a device for quick approach
  • Accident-preventing devices on the flywheel casing, on the control handle, and on the blade
  • Digital control of quality and cutting length
  • Hydraulic cylinder with regolation of cutting pressure
  • Blade tensioning obtained through manual rotation of the handwheel and guaranteed by electro-mechanical switch
  • Bimetal blade 3200 x 27 x 0,9 mm
  • Cutting thickness 1,2 mm
  • Stroke feeder material 600 mm
  • Hydraulic tank motor 0,75 kW
  • 0,09 kW power-driver pump for band cooling
  • Possibility of manual and semiautomatic cut
  • Machine pre-arranged to be moved on transpallet

24 måneders garanti på fabrikant- og reparationsskader

Read more