CME FS-2 Bed Mill

Technical Data:

X-axis: 1.800 mm
Y-axis: 1.000 mm
Z-axis: 1.000 mm
Clamping table: 2.000 x 850 mm
Continous speed: 20.000 mm/min
Spindle motor: 875 Nm 22 kW
Spindel cone: DIN-69871 SK-50
Spindle speed: 50 – 4.000 rpm
Tool capacity: 24 pcs
Motor X-axis: 27 Nm
Motor Y-axis: 27 Nm
Motor Z-axis: 27 Nm
Hydraulic motor: 1,10 kW
Central lubrication: 0,36 kW
Coolant motor: 1,10 kW
Back gauge X-axis: 50 x 20 mm
Back gauge Y-axis: 50 x 10 mm
Back gauge Z-axis: 50 x 10 mm
CNC control: Heidenhain TNC 426

 

Accessories:

Universal milling head with 45° setting on 2 axis
M-functions
Vertical axis by screw clamp
Doubble gripper system, loading and unloading only in vertical position
Chip conveyor with discharge height of approximatly 1.000 mm
Electrical system mounted in control cabinet on the machine
Control cabinet is noise-proofed
All electrical control is done from the mounted control panel which have a CNC section and a manual section
HR-410 eletrical hand wheel that can be switched between axis, is also mounted on the control panel
Linear scales on all axis
Complete water cooling system

Category: SKU: 03-3

Description

Technical Data:

X-axis: 1.800 mm
Y-axis: 1.000 mm
Z-axis: 1.000 mm
Clamping table: 2.000 x 850 mm
Continous speed: 20.000 mm/min
Spindle motor: 875 Nm 22 kW
Spindel cone: DIN-69871 SK-50
Spindle speed: 50 – 4.000 rpm
Tool capacity: 24 pcs
Motor X-axis: 27 Nm
Motor Y-axis: 27 Nm
Motor Z-axis: 27 Nm
Hydraulic motor: 1,10 kW
Central lubrication: 0,36 kW
Coolant motor: 1,10 kW
Back gauge X-axis: 50 x 20 mm
Back gauge Y-axis: 50 x 10 mm
Back gauge Z-axis: 50 x 10 mm
CNC control: Heidenhain TNC 426

 

Accessories:

Universal milling head with 45° setting on 2 axis
M-functions
Vertical axis by screw clamp
Doubble gripper system, loading and unloading only in vertical position
Chip conveyor with discharge height of approximatly 1.000 mm
Electrical system mounted in control cabinet on the machine
Control cabinet is noise-proofed
All electrical control is done from the mounted control panel which have a CNC section and a manual section
HR-410 eletrical hand wheel that can be switched between axis, is also mounted on the control panel
Linear scales on all axis
Complete water cooling system